ATIS 3 is a new (new category and design) glider, whose performance is shifted to the upper limit of category B EN ( LTF 1-2 ) and is therefore suitable for recreational sport and recreational flying, for all who appreciate the playful, sporty spirit and performance (speed 50-52 km / h, the ratio is almost sliding value 9).
In category B, EN (LTF 1-2) added three ATIS and glider ANAKIS designed for occasional pilots and pilots - fresh graduates.
High performance ATIS 3 is achieved by moving the safety characteristics of the test maneuvers outline the very upper limit of classification B, but in the safety assessment reaches ATIS 3 rating and above and is becoming one of the few gliders safety feature in a lower category than the performance itself wings. Therefore it is recommended especially with regular airtime pilots, pilots with a minimum airtime or novice pilots recommend ANAKIS.
ATIS 3 is a good alternative for recreational flying with the engine, where it surprises and amazes easy start, safety, smart management and outstanding performance.
The main features are:
- high stability
- speed and the ability to enforce against the wind, strong performance characteristics
- low weight (4.9 kg in size M)
- very good management
- adept at turning thermals
- predictable response in non-standard modes parachute
- minimum sink rate and high glide at high speed (up to 52 km / h)
- Precise handling and maximum quality
Canopy sew the material manufacturer in South Korea Dokdo Dominico Textiles. For optimal results combine several fabrics and several types of coating, minimize natural aging fabric and yet does not increase the weight of the glider.
top and bottom covers are made from material N20 Dokdo-DMF (WR) on the weight of 36 grams per square meter.
Profiles are made from material Until N30-DFM and divided by the front panel leading edge is designed for increased durability of the material Dokdo-N20 DMF (WR) weighing 38 grams per square meter.
Our choice can be compared with the original technical data sheets . material is made to the structure of weaving "Rip Stop "fibers of polyamide (PA 6.6) by the American firm DU PONT .
The parachute bridle ATIS 3, we used a very good line from the German firm EDELRID and Liroswhich show high resistance to mechanical wear and stability of exact length.
The upper gallery is laid up Edelrid 7850-080 with a diameter of 1.0 mm, the core is made of "dyneema" braided polyester. The lower lines are made of PPSL 160 and 200 Liros and brakes EDELRID 7850-240.
The risers are made of webbing width of 20 mm from the supplier TISNOV FLOUR . The main lines are connected to free ends with snap hooks DELTA D from the French supplier Maillon Rapide .